# Time-Domain Thermoreflectance (TDTR) Analysis > Time-Domain Thermoreflectance (TDTR) is an optical pump–probe technique used to measure thermal conductivity, thermal boundary conductance, and heat transport properties in thin films deposited on solid substrates. Source: https://covalent.com/techniques/thermal-analysis/time-domain-thermoreflectance-tdtr-analysis/ Updated: 2026-05-18T21:05:13+00:00 --- ![](https://spcdn.shortpixel.ai/spio/ret_img,q_cdnize,to_auto,s_webp:avif/covalent.com/wp-content/themes/covalent/assets/images/blog-default-banner.jpg) ![](https://spcdn.shortpixel.ai/spio/ret_img,q_cdnize,to_auto,s_webp:avif/covalent.com/wp-content/themes/covalent/assets/images/blog-mobile-banner.jpg) [Connect](https://covalent.com/covalent-connect/) # Time-Domain Thermoreflectance (TDTR) Analysis Time-Domain Thermoreflectance (TDTR) is an optical pump–probe technique used to measure thermal conductivity, thermal boundary conductance, and heat transport properties in thin films deposited on solid substrates. [Add to Quote](#) ## What is TDTR? Time-Domain Thermoreflectance (TDTR) uses a pulsed pump laser to heat a thin metal transducer on the sample surface, and a delayed probe laser to monitor the resulting surface temperature decay through small changes in reflectivity. By fitting the measured response with a multilayer thermal model, TDTR can quantify thermal conductivity and interface conductance across length-scales between tens of nanometers to microns. - **Thermal Conductivity of Thin Films:** Enables measurement of thermal transport properties in thin films and multilayer structures. - **Transients:** Provides high temporal resolution for observing transient heat transport phenomena. - **Interfaces:** Can quantify interfacial thermal conductance between different material layers. Table of Contents ## Why Use TDTR? TDTR is used when high-resolution thermal property data is needed from small areas, multilayer structures, or buried interfaces. It is well suited for semiconductor materials, multilayer stacks, bonded structures, and R&D programs where composition, porosity, grain structure, or interface quality may affect thermal performance. ### Complementary to bulk methods Measures thermal properties of thin films and multilayer structures that cannot be isolated using bulk techniques. ### Localized measurement capability Enables thermal characterization of small regions (~10 µm scale), including device-scale features. ### Multilayer and interface analysis Quantifies thermal transport across layered structures, including interfacial thermal conductance between materials. Covalent offers Time-Domain Thermoreflectance (TDTR) analysis for quantitative measurement of thermal conductivity in thin films, microscopic areas, and interfaces. [Get a Quote](https://covalent.com/get-a-quote/) ## Working Principle of TDTR After depositing a thin metal transducer, the sample is heated with an ultrafast pump laser and monitored with a delayed probe laser. The measured signal is compared with a multilayer thermal model using the sample stack, layer thicknesses, spot size, and modulation conditions. Standard TDTR is typically most sensitive to near-surface through-plane transport; specialized beam-offset, variable-spot-size, or related TDTR configurations are used when directional in-plane heat transport is the objective. ### Equipment Used for TDTR: A TDTR system typically includes picosecond pulsed laser source, optical delay stage, pump and probe optics, focusing objectives, and a photodetector connected to lock‑in amplification electronics. The sample is coated with a thin metal transducer layer such as aluminum or gold to facilitate laser heating and temperature detection. Laboratory setup with various testing devices for blockchain projects at Covalent. TDTR instrument used for thin-film and thermal boundary resistance measurements. ### Key Differentiators This technique measures thermal conductivity, thermal diffusivity, and thermal boundary conductance with high sensitivity, capable of detecting thermal conductivity changes in nanometer-scale thin films. It is compatible with thin films, multilayers, semiconductors, polymers, and coatings, and typically probes depths ranging from hundreds of nanometers to several microns depending on modulation frequency. Samples should have flat, reflective (specular) surfaces and be approximately 1 cm × 1 cm in size. #### Strengths - Optimized for thin films and multilayers: Provides accurate thermal measurements in layered structures where bulk methods are limited. - High sensitivity to nanoscale transport: Resolves thermal behavior in nanoscale layers and interfaces. - Interfacial thermal characterization: Enables direct measurement of thermal boundary conductance. - Non-contact optical technique: Eliminates the need for physical probes, reducing measurement-induced artifacts. - Adjustable measurement depth: Modulation conditions can be tuned to probe different depths within layered structures. #### Limitations - Requires metal transducer coating: Samples must be coated with a thin metal layer (typically applied by the lab) to enable measurement. - Surface quality requirements: Samples must have smooth, optically reflective (specular) surfaces for accurate signal detection. - Model-dependent analysis: Extraction of thermal properties requires fitting to a multilayer thermal model. - Limited penetration depth: Typically sensitive to depths from hundreds of nanometers to several microns, depending on modulation conditions. Two colleagues working together on a laptop, discussing a project in a bright, professional environment. Unsure Whether TDTR Is Right for You? Whether you’re looking for fast troubleshooting or ongoing support, Covalent’s TDTR services are scalable solutions to meet your needs. [Talk to an Expert](https://covalent.com/contact-us/) ## Example Outputs Representative TDTR data showing the ratio signal as a function of pump-probe delay time for materials with different thermal conductivities. Experimental data (markers) are compared to multilayer thermal model fits (lines). Materials with higher thermal conductivity (e.g., diamond) exhibit faster signal decay, while lower conductivity materials (e.g., SiO2) show slower decay. Agreement between measured data and model fits enables accurate extraction of thermal properties. ## Use Cases - Semiconductor - Thermal barrier coatings - Energy materials - Polymers and composites - Thin films and nanomaterials - ![Semiconductor](https://spcdn.shortpixel.ai/spio/ret_img,q_cdnize,to_auto,s_webp:avif/covalent.com/wp-content/uploads/2025/11/uc-semiconductor.jpg) ### Semiconductor Evaluation of heat dissipation and thermal behavior in microelectronic structures. - ![Semiconductor](https://spcdn.shortpixel.ai/spio/ret_img,q_cdnize,to_auto,s_webp:avif/covalent.com/wp-content/uploads/2025/11/uc-aerospace-and-energy.jpg) ### Thermal barrier coatings Characterization of thermal conductivity in ceramic coatings and protective layers. - ![Energy & Battery Research](https://spcdn.shortpixel.ai/spio/ret_img,q_cdnize,to_auto,s_webp:avif/covalent.com/wp-content/uploads/2025/11/uc-energy-storage.jpg) ### Energy materials Analysis of heat transport in thermoelectric and energy-related materials. - ![Pharmaceuticals](https://spcdn.shortpixel.ai/spio/ret_img,q_cdnize,to_auto,s_webp:avif/covalent.com/wp-content/uploads/2025/11/uc-pharmaceuticals-biomedical-devices.jpg) ### Polymers and composites Evaluation of heat conduction in functional polymer systems and composite materials. - ![Material Science](https://spcdn.shortpixel.ai/spio/ret_img,q_cdnize,to_auto,s_webp:avif/covalent.com/wp-content/uploads/2025/11/Material-science.jpg) ### Thin films and nanomaterials Characterization of thermal properties in nanoscale films and advanced materials such as graphene and 2D systems. ## Complementary Techniques - Steady-State Thermoreflectance (SSTR): Similar to TDTR, but uses continuous wave-excitation. Primarily sensitive to in-plane transport and micron-scale heat flow. - 3‑omega method: Uses an AC current to heat a patterned metal line while measuring oscillations electrically. Well suited for bulk or thick samples; requires lithographic sample preparation. - Laser Flash Analysis (LFA): Measures thermal diffusivity by heating the backside of a sample and monitoring the front surface response. Ideal for bulk materials and through thickness measurements. - Scanning Thermal microscopy (SThM): AFM-based technique that probes local heat transfer with high spatial resolution, but is sensitive to tip-sample contact effects and is difficult to quantify. - Infrared thermography: Uses an IR camera to map surface temperature. Provides wide-area thermal imaging with limited spatial resolution (5-50 µm). [Differential Scanning Calorimetry (DSC)](https://covalent.com/techniques/thermal-analysis/differential-scanning-calorimetry-dsc-services/) Quantifies heat flow for material optimization. [Explore](https://covalent.com/techniques/thermal-analysis/differential-scanning-calorimetry-dsc-services/) [Add to Quote](#) [Dynamic Mechanical Analysis (DMA)](https://covalent.com/techniques/mechanical-testing/dynamic-mechanical-analysis-services-dma/) Characterizes thermal and mechanical properties of soft materials. [Explore](https://covalent.com/techniques/mechanical-testing/dynamic-mechanical-analysis-services-dma/) [Add to Quote](#) [Fourier Transform Infrared Spectroscopy (FTIR)](https://covalent.com/techniques/chemical-analysis/fourier-transformed-infrared-spectroscopy-ftir/) Rapid, non-destructive molecular fingerprinting across materials. [Explore](https://covalent.com/techniques/chemical-analysis/fourier-transformed-infrared-spectroscopy-ftir/) [Add to Quote](#) [Gas Chromatography-Mass Spectrometry (GC-MS)](https://covalent.com/techniques/chemical-analysis/gas-chromatography-mass-spectroscopy-gc-ms/) Identifies and quantifies small organic molecules in mixtures. [Explore](https://covalent.com/techniques/chemical-analysis/gas-chromatography-mass-spectroscopy-gc-ms/) [Add to Quote](#) [Thermomechanical Analysis (TMA)](https://covalent.com/techniques/thermal-analysis/thermomechanical-analysis-tma/) Measures material dimension changes with temp, time, or force. [Explore](https://covalent.com/techniques/thermal-analysis/thermomechanical-analysis-tma/) [Add to Quote](#) ## Frequently Asked Questions Identifying the right test can be complex, but it doesn’t have to be complicated. Here are some questions we are frequently asked. - ### What types of materials can be analyzed using TDTR? TDTR can be applied to metals, semiconductors, ceramics, polymers, thin films, multilayers, and nanostructured materials, provided the sample surface is specular and can accommodate a metal transducer layer. - ### Why is a metal transducer layer used in TDTR measurements? A thin metal film (commonly aluminum) is deposited on the sample surface to limit laser heating to the sample’s surface, and to convert temperature changes into consistent, detectable reflectivity changes, enabling accurate thermoreflectance measurements. - ### What thickness of films can TDTR measure? TDTR is well suited for measuring thermal properties in thin films ranging from tens of nanometers to several micrometers, depending on the sample’s properties, and the selected values of adjustable experimental parameters like laser spot-size and modulation frequency. - ### What spatial resolution does TDTR provide? The spatial resolution is determined by the laser spot size, typically 2–50 µm, allowing localized measurement of thermal properties. - ### Can TDTR measure thermal interface resistance? Yes. TDTR is widely used to measure thermal boundary conductance (or interface resistance) between layers in thin-film stacks and multilayer materials. - ### How accurate are TDTR measurements? TDTR measurements typically achieve thermal conductivity accuracy within approximately 10%, depending on signal quality and model assumptions. Resources ![](https://spcdn.shortpixel.ai/spio/ret_img,q_cdnize,to_auto,s_webp:avif/covalent.com/wp-content/themes/covalent/assets/images/resource-bg-c.svg) Resources ![](https://spcdn.shortpixel.ai/spio/ret_img,q_cdnize,to_auto,s_webp:avif/covalent.com/wp-content/themes/covalent/assets/images/resource-bg-o.svg) [![Optimizing Polymers and Adhesive Materials With Thermogravimetric Analysis and Differential Scanning Calorimetry](https://spcdn.shortpixel.ai/spio/ret_img,q_cdnize,to_auto,s_webp:avif/covalent.com/wp-content/uploads/2025/09/Episode-22-Banner_v3.0_zoom-768x768.png) Webinar Optimizing Polymers and Adhesive Materials With Thermogravimetric Analysis and Differential Scanning Calorimetry 60 mins May 06, 2021](https://covalent.com/webinars/optimizing-polymers-and-adhesive-materials-with-thermogravimetric-analysis-and-differential-scanning-calorimetry/) [![TEM Sample Preparation: Optimizing and Improving Sample Turnaround Time](https://spcdn.shortpixel.ai/spio/ret_img,q_cdnize,to_auto,s_webp:avif/covalent.com/wp-content/themes/covalent/assets/images/resource-thumbnail.jpg) Video TEM Sample Preparation: Optimizing and Improving Sample Turnaround Time Oct 24, 2025](https://covalent.com/resource-library/tem-sample-preparation-optimizing-and-improving-sample-turnaround-time/) [![Explore Thermal Characterization Techniques: TGA and DSC](https://spcdn.shortpixel.ai/spio/ret_img,q_cdnize,to_auto,s_webp:avif/covalent.com/wp-content/uploads/2025/10/explore-thermal-characterization-768x768.jpg) Video Explore Thermal Characterization Techniques: TGA and DSC Sep 01, 2021](https://covalent.com/resource-library/explore-thermal-characterization-techniques-tga-and-dsc/) [![Thermal Analysis Application Brief Determination of Polymer Crystallinity by DSC](https://spcdn.shortpixel.ai/spio/ret_img,q_cdnize,to_auto,s_webp:avif/covalent.com/wp-content/uploads/2023/10/Thermal-Analysis-Application-Brief-Determination-of-Polymer-Crystallinity-by-DSC.jpg) Application Note Thermal Analysis Application Brief Determination of Polymer Crystallinity by DSC Jun 12, 2021](https://covalent.com/resource-library/thermal-analysis-application-brief-determination-of-polymer-crystallinity-by-dsc/) [![Thermal Solutions: Characterization of Polyurethane by TGA and Hi-Res TGA](https://spcdn.shortpixel.ai/spio/ret_img,q_cdnize,to_auto,s_webp:avif/covalent.com/wp-content/uploads/2023/10/Thermal-Solutions-Characterization-of-Polyurethane-by-TGA-and-Hi-Res-TGA.jpg) Application Note Thermal Solutions: Characterization of Polyurethane by TGA and Hi-Res TGA Jun 12, 2021](https://covalent.com/resource-library/thermal-solutions-characterization-of-polyurethane-by-tga-and-hi-res-tga/) [![Thermal Solutions: Characterization of Epoxy Reinforced Glass by DSC and DMA](https://spcdn.shortpixel.ai/spio/ret_img,q_cdnize,to_auto,s_webp:avif/covalent.com/wp-content/uploads/2023/10/Thermal-Solutions-Characterization-of-Epoxy-Reinforced-Glass-by-DSC-and-DMA.jpg) Application Note Thermal Solutions: Characterization of Epoxy Reinforced Glass by DSC and DMA Jun 12, 2021](https://covalent.com/resource-library/thermal-solutions-characterization-of-epoxy-reinforced-glass-by-dsc-and-dma/) Need Expert Guidance? Our experts can help you determine if this approach is the best fit for your samples and discuss the next steps. [Talk to a Materials Scientist](https://covalent.com/contact-us/)