Opens in a new tab

Product Liability Testing for Law Firms and Their Experts

Covalent gives law firms and their retained testifying experts a lab to work in: our instruments, our lab space and a dedicated project lead who runs measurements as the expert directs. We deliver fast, rigorous data on the samples and methods provided, so your expert can reach conclusions sooner.

Two Ways to Use Our Lab in a Product Liability Matter

We don't serve as testifying experts or give opinions on the details of a case. We provide high-quality, fast and rigorous data on the samples and methods provided, so the retained expert has what they need.

How we workWhat happensWhat you get
1. Hosted inspectionsYour retained experts come to our Sunnyvale lab and use our lab space and instruments. A dedicated Covalent project lead runs each measurement as the experts direct and records everything as it happens. All visitors sign our visitor and confidentiality agreement and follow our site safety, ITAR and SOC 2 controls.Lab space and instrument time reserved for your matter, a trained operator on every instrument, and images, data and logs at the end of the session
2. Analytical testing under expert guidanceThe retained testifying expert defines the samples, methods and sequence. Our scientists run the work and deliver the data with full method documentation.A test plan built around the expert's instructions, advice on what each instrument can and can't measure, and data, images and method descriptions in every report

ISO/IEC 17025 accredited lab; scope varies by method.

An Independent Third-Party Lab for Either Side

We run a conflict check before accepting any matter. Many clients, including manufacturers looking into a field failure before a claim is filed, engage us through their counsel.

  • Law firms: plaintiff and defense firms that need lab capacity for the experts they retain.
  • Retained testifying experts: the instruments and operators behind your analysis, run to your instructions.
  • In-house counsel and insurers: analytical data for matters handled with a retained expert.

What We Measure

Our deep materials expertise and capabilities help law firms and their experts reach their conclusions faster.

Material or partData we provide
Fracture surfacesHigh-magnification SEM and optical images of fracture surfaces, documented for the expert's review
Plastics and rubbersComposition, thermal properties and chemical changes in polymers, elastomers and adhesives
Metals and alloysAlloy composition, microstructure, hardness and corrosion products
Coatings and interfacesCross-sections, layer thickness and surface chemistry of coatings and bonded joints
Residues and particlesChemical identification of residues, films and particles found on a sample
ElectronicsCross-sections, X-ray imaging and thermal imaging of boards, connectors and components

Data for the Areas Your Expert Is Evaluating

All testing is guided by the retained testifying expert. Conclusions on these questions are theirs to draw.

Area the expert is evaluatingData we can provide under their direction
ManufacturingComposition, dimensions, voids, inclusions and microstructure of the subject part, and of exemplar parts for comparison
Design and material selectionMechanical, thermal and chemical property data for the materials used
Use and service conditionsSurface and fracture imaging, residue chemistry and thermal analysis of the sample as received

How We Handle Samples

We log, photograph and tag every sample, record every handoff, run non-destructive methods first when the expert directs, and work to a written protocol. If a matter needs more, we can discuss it with counsel case by case.

  • Chain of custody: samples are logged, photographed and tagged on arrival, and every handoff is recorded.
  • Non-destructive methods: micro-CT, 2D X-ray and acoustic microscopy are available before any cutting, in the order the expert sets.
  • Data privacy: NDAs before details are shared, and project data kept in SOC 2 compliant software with access limited to your project team. Your deliverables and identifiable project data remain yours; see our Terms.
  • Evidence holds: available under a separate retention agreement. The hold period, storage terms and who can authorize release are set in your proposal.
  • Visitors: all visitors sign our visitor and confidentiality agreement and follow our site safety, ITAR and SOC 2 controls.
  • Export-controlled items: testing of ITAR or EAR controlled items depends on applicable licenses. Please flag them when you contact us.

How a Product Liability Project Works

Before accepting a matter, we run a conflict check for existing work on the same product or with the same parties (1). We then sign an NDA and talk with counsel and the retained expert about the samples and data needed (2). The expert sets the methods and sequence, and we advise on instrument capabilities and assign a project lead (3).

Samples arrive under chain of custody and are logged and photographed as received (4). Next comes a hosted inspection with the expert in our lab, or testing run to the expert's plan (5). You receive data, images and method descriptions in a litigation report, plus follow-up testing if the expert requests it (6).

1Conflict checkConflict checkSame product, same parties
2Scoping callScoping callCounsel, expert, NDA
3Test planTest planSet by the expert
4Sample intakeSample intakeLogged and photographed
5Inspection or testingInspection or testingHosted or expert-directed
6Data deliveryData deliveryData, images, methods
Product liability project: (1) conflict check, (2) scoping call, (3) test plan, (4) sample intake, (5) inspection or testing, (6) data delivery.

Instruments Available for Your Matter

MeasurementTechniques
Internal imaging without cuttingMicro-CT, 2D X-ray, scanning acoustic microscopy
Surface and fracture imagingSEM, optical and digital microscopy, cross-sectioning
Material identification and compositionFTIR, ICP-OES, SEM-EDS, metallography
Thermal and chemical properties of polymersDSC, TGA, GC-MS, DMA
Surface and residue chemistryXPS, Raman
Mechanical propertiesTensile testing, nanoindentation, DMA
ElectronicsFIB-SEM, infrared thermography, nanoprobing, cross-sections

Why Law Firms and Experts Work with Covalent

We are an independent third-party lab: we don't make or sell products, and we work with plaintiff and defense teams. Imaging, chemistry, metallurgy and mechanical testing happen under one roof, with SEM, micro-CT, FTIR and XPS in the same building, coordinated by one project lead. Our scientists know the instruments well enough that your expert's time in the lab is well spent.

ISO/IEC 17025 accredited lab; scope varies by method. Turnaround is typically 5–7 business days, with rush options available at an extra cost for inspection deadlines and case schedules.

Frequently Asked Questions

What is a hosted inspection?

Your retained experts come to our lab and use our lab space and instruments. A dedicated Covalent project lead operates the instruments and runs each measurement as the experts direct. All visitors sign our visitor and confidentiality agreement and follow our site safety, ITAR and SOC 2 controls.

Do your scientists serve as expert witnesses?

No. Our scientists only speak to facts about the testing and analysis they performed under the guidance of the retained testifying expert. We don't serve as expert witnesses or give opinions on causation or fault.

Can your scientists be subpoenaed?

Yes. A Covalent scientist may be subpoenaed as a fact witness about the testing they performed. Time and costs for responding to a subpoena are billed as set out in your quote.

Do you work with plaintiffs or defendants?

Both. We are an independent third-party laboratory and work with law firms on either side. Before accepting a matter, we run a conflict check for work on the same product or with the same parties.

Will testing destroy the sample?

Non-destructive methods such as micro-CT, X-ray and acoustic microscopy can be run first. The retained expert decides the sequence, including whether and when any destructive steps happen.

How do you protect case data?

We sign NDAs before you share details. Project data is kept in SOC 2 compliant software and only your project team can access it. Your deliverables and identifiable project data remain yours; see our Terms.

How long do you keep samples?

For litigation matters, evidence holds are available under a separate retention agreement. The hold period, storage fee and who can authorize release are agreed in your proposal.

How fast can you start?

Most projects are completed in 5–7 business days, with rush options available at an extra cost for inspection deadlines and case schedules.

Litigation disclaimer

Covalent is an independent third-party laboratory. For matters with potential legal or litigation use, our scope is limited to generating analytical data only — we do not provide interpretation, opinion on causation, fault, or fitness-for-use, and we do not serve as expert witnesses. Covalent personnel may be subpoenaed as fact witnesses regarding testing performed; associated time and costs are billed as set out in your quote. Covalent's liability is limited to the fees paid for the Services. Full terms and conditions: covalent.com/terms-and-conditions

Have Samples for a Matter?

Talk to a project lead about hosting an inspection or running tests under your expert's direction.

Request a Consultation